HomeAboutStudentsFaculty and StaffContactDirections

Author Title    Display # 
Dagher HJ 2000. Development of AASHTO Design Specification for FRP-Glulam Bridges, Transportation Research Board Meeting.
Dagher HJ 1999. Advanced wood composites: Lessons from the past and directions for the future, 1st International Conference on Advanced Engineered Wood Composites: 2-4.
Dagher HJ, Lindyberg R 1999. Probabilistic nonlinear computer model for reinforced glulams, Proceedings of the Structures Congress: 638-687.
Dagher HJ, Lindyberg R 1999. West Seboeis Stream FRP-Glulam Highway Bridge, International Composites Expo, Session 25-D.
Dagher HJ, Lindyberg RF 1999. Analysis and design of FRP glulams, 1st International Conference on Advanced Engineered Wood Composites: 24.
Dagher HJ, Lindyberg RF 2001. Probability-modeling of FRP reinforced beams, SEI/ASCE Structures Congress.
Dagher HJ, et al. Reliability-Based Design of Utility Pole Structures, ASCE/SEI Manuals and Reports on Engineering Practice.
Dagher HJ, Lopez-Anido R, Gardner D, Kahl M, Dura M 2005. Design of innovative hollow extruded WPC sheet piling, 8th International Conference on Woodfiber-Plastic Composites Proceedings.
Dagher HJ, Shaler SM, Lowry C 1999. FRP reinforced LVL and structural I-joists, 1st International Conference on Advanced Engineered Wood Composites: 21-23.
Dagher HJ, Stamato G, Davids WG 2002. Applicability of European yield model for nailed joints using reinforced OSB, Proceedings of the 7th World Conference on Timber Engineering.
Dagher HJ 2000. A new generation of wood-FRP hybrid composites can improve disaster resistance, Durability and Disaster Mitigation in Wood Frame Housing.
Dagher HJ 2000. Advanced wood composites for construction, VII Brazilian Congress of Timber Structures.
Daniel H 2003. Technology transfer behavior in collaborative research centers, Proceedings of the IASTED International Conference on Alliances, Mergers and Acquisitions.
Daniel HZ, Hempel DJ, Srinivasan N 2003. Project selection a process analysis, Industrial Marketing Management: 39-54.
Daniel HZ 2002. The impact of reference points in time on the adoption timing of novel manufacturing technology products, The Journal of the Association of Marketing Educators, 5(3): 64-78.
Daniel HZ, Hempel DJ, Srinivasan N 2002. A model of value assessment in collaborative R&D programs, Industrial Marketing Management: 653-664.
Davids WG, Dagher HJ, Breton JM 2000. Modeling creep deformations of FRP-reinforced glulam beams, Wood and Fiber Science, 32(4): 426-441.
Davids WG, Zhang H, Turner A, Peterson M 2007. Beam finite-element analysis of pressurized fabric tubes, Journal of Structural Engineering, 133(7): 990-998.
Davids WG, Nagy E, Richie MC 2007. Fatigue behavior of composite-reinforced glulam bridge girders, Journal of Bridge Engineering.
Davids WG, Dagher HJ, Sanchez O, Weaver CW 2005. Design, construction and load testing of a composite FRP-glulam-concrete girder bridge, Transportation Research Record: Journal of the Transportation Research Board, CD 11-S, TRB: 409-417.
Davids W, Dagher HJ, Breton J 1999. Experimental and numerical study on creep of FRP reinforced glulam beams, Proceedings of the 1st Rilem Symposium on Timber Engineering: 581-590.
Davids W, Dagher HJ, Cassidy E 2005. FRP-reinforced shear walls and diaphragms, 3rd International Conference on AEWCs.
Davids WG, Botting JK, Peterson M 2006. Development and structural testing of a composite-reinforced timber highway guardrail, Construction and Building Materials, 20(9): 733-743.
Davids WG, Cassidy ED, Dagher HJ 2006. Lateral load resistance of FRP-reinforced OSB shear walls and diaphragms, 49th Annual Convention of the Society of Wood Science and Technology.
Davids WG, Dagher HJ, Cassidy ED, Martin K, Gardner D 2004. FRP-reinforced oriented strand board panels in wood-framed shear wall construction, Proceedings of the NSF Housing Research Agenda Workshop.
<< Start < Prev 1 2 3 4 5 6 7 8 9 10 Next > End >>
Results 51 - 75 of 397
An ISO 17025 Accredited Laboratory
(207) 581-2123